Release time：2024-12-29 14:38
Source：
Page view：381
Ultrasonic therapy is a widely used physical therapy that can promote blood circulation, reduce inflammation, relieve pain, and accelerate wound healing through the action of high-frequency sound waves. When using an ultrasonic therapy device, it is essential to operate it correctly and follow the precautions to ensure the safety and effectiveness of the treatment. The following is a detailed guide to the operation procedures and precautions of ultrasonic therapy.
I. Ultrasonic Therapy Device Operation Procedures
1. Preparation:
- The patient should be in a comfortable position and the skin of the treatment area should be clean and dry.
- Apply a coupling agent (such as medical gel) to the treatment area to reduce air contact and ensure that the ultrasound can be effectively transmitted to the skin.
2. Turn on the device:
- Turn on the power switch of the ultrasonic therapy device, usually set it to the "ON" position.
- Set the output mode and select low, medium and high modes by pressing the MODE key.
3. Adjust treatment parameters:
- Adjust the treatment time, intensity and frequency according to the patient's condition and the doctor's instructions.
- The duration is usually between 5 and 15 minutes, and the intensity is set according to the patient's tolerance and the purpose of the treatment.
4. Start treatment:
- Gently place the ultrasound head on the treatment area, keep it stable, and avoid applying excessive pressure to the skin.
- Start treatment, making sure the ultrasound head is always in contact with the skin, but avoid staying in the same area for too long.
5. End of treatment:
- When the treatment time is over, turn off the power of the ultrasound therapy device.
- Wash the treatment area, remove the coupling agent, and then clean and disinfect the ultrasound head.
II. Precautions for ultrasound treatment
1. Hygiene and safety:
- Always clean and disinfect the treatment device before treatment to prevent infection.
- Operators should wear gloves and follow the hygiene standards of medical equipment.
2. Use of coupling agent:
- Oily substances should not be used as coupling agents, as they may absorb ultrasound energy and cause skin burns.
3. Dose control:
- Strictly follow the doctor's treatment plan and avoid overexposure to ultrasound.
- For sensitive areas or children, treatment parameters should be more conservative.
4. Treatment process monitoring:
- During the treatment, observe the patient's reaction and stop immediately if there is any discomfort.
- Avoid using near open wounds, malignant tumors, and metal implants.
5. Combined treatment:
- It can be combined with drug ion introduction and use ultrasound therapy fixation patches to increase the treatment effect, but professional guidance must be followed.
6. Acupoint treatment:
- Under the guidance of traditional Chinese medicine theory, the application of ultrasound therapy on acupoints can enhance the efficacy, but it must be operated by professionals.
In short, ultrasound therapy is an effective rehabilitation method, but correct operation and careful use are key. Any questions or discomfort should be consulted with medical professionals in a timely manner. Contact Nuopuen's professional after-sales staff to provide you with better advice.